How to Find Water Leaks on Your Home Plumbing System

Are you experiencing an unexpected rise on your recent water bills or is there a drop on the water pressure inside your home? If this is the case, then your plumbing system likely has a leak. It could either be an unseen burst pipe or you’re just turning a blind eye on dripping shower heads or taps.

Well, leaking taps, toilets or water lines are a problem indeed. It causes you to incur higher monthly bills while wasting precious water in the process. Statistically speaking, a single dripping tap can waste approximately 20,000 litres of water in a year. Look at it at a greater scale and you’ll be astonished to imagine how huge the amount of water a neighbourhood can throw away due to leaks.

So, if you suspect leaks on your plumbing at home, investigate as soon as possible to find the culprit and repair it. Follow this tips from our expert plumbers:

1. Check Your Water Meter

A leak can found on the line between your water meter and your house. While this is difficult to detect physically since signs don’t usually appear, you can test it using your water meter and main shut off valve. This is done by turning off your water valve and checking your meter. If the meter indicates that water is continuously flowing with the valve already turned off, then the leak is found outside of the house. Conversely, if the meter stops when the valve is off but it runs when open even if all water outlets inside the house are shut off, the leak is likely to be within the house.

2. Check Your Hot Water System

Most of the time, leaks on hot water systems come from the pressure release valve. This is the area to inspect first. If you can see any physical signs, such as moisture or wetness on the outside of the valve, listen for a possible hissing sound. It is a proven indicator that there is a steady leak of water. Call an emergency plumber right away if this is confirmed.

3. Put some Colour on Your Toilet Tank

One of the most common hidden leaks in the average home is a continuously flowing toilet. This happens if the tank-fitting of a toilet is broken or is improperly installed. To test for this type of leak, poor a food dye on the tank – small enough to colour the water in it. Then, examine the water on the toilet bowl after a few minutes. If there is any sign of the dye flowing into the bowl, there is a leak on your toilet. This should be fixed ASAP.

4. Visually Inspect All Taps, Showers and Other Fixtures

Go all over your house and check all water fixtures to ensure that there are no leaks. The best way to do this is by drying up all the surfaces below taps and showers. If these areas get wet after a few minutes, then your fixtures may have leaks. Doing replacements can be easy, but make sure to hire experts to ensure that every fixture is properly installed.

5. Check for Water Damage

If the plumbing lines inside your home pass through walls, you need to inspect for water damage. There is a possibility that there are leaks within the pipes inside your walls, especially if you detected no other leaks in you home. The most obvious sign of water damage is moisture and discolouration found on the surfaces near pipes. If this is present, make sure to solve the problem at once to avoid further damage on your home that can cause more and more expenses.

After locating your water leaks at home, let our plumbing experts at Aqua Maintain provide you with the repair services that you need. Our team of professional people can do every plumbing task you’ll require. We also offer emergency plumbing services in the areas of Altona, Point Cook, Werribee, Hoppers Crossing, Tarneit and Wyndham Vale. We are ready to be dispatched 24 hours a day and 7 days a week.

Advantages of Using High Tech Video Camera for Plumbing

Are you aware that video camera equipment are now becoming one of the most important tools that a plumber should have? Well, this high tech gadgetry brings efficiency to most emergency plumbing jobs such as clearing blocked drains or toilets. And we at Aqua Maintain are using this technology for quite some time now, enabling us to deliver quality service to our clients.

A plumbing video camera is a specialised waterproof device connected to a monitor or a screen. It delivers a video feed that enables professional plumbers to easily inspect sewer lines, drains and other types of piping. This process reduces the time needed to detect cracks, blockages, leaks and other plumbing problems.

Clearly, using video inspection equipment for plumbing jobs has many advantages.

Eliminates the Guesswork

Oldschool plumbers, most of the time, rely solely on their experience when it comes to diagnosing a plumbing problem. This means that they’ll be gathering information from the owner on the signs or indications of the problem and they’ll do guesswork to pinpoint the problem and the corresponding solution. We are not saying that experience should be disregarded nowadays with the presence of efficient technology. However, with the use of plumbing gadgetry combined with expertise, guesswork will be eliminated and problems will be resolved quickly.

Less Invasive Diagnostic and Repairs

With the use of video camera, the plumbing problem can be detected with pinpoint accuracy. There will be no hours of digging in your backyard or punching holes on your walls just find blockages or leaks. Furthermore, accurate diagnostic also means that we’ll exactly know what to repair or replace to resolve the problem. We will know how deep to dig to reduce the damage to your garden and we will also be able to locate the leaks on your pipes without damaging your walls.

Reduced Time and Cost

You may say that using efficient technology translates to increased cost for the plumbing services that you’ll receive. Well, this is not the case actually. With the efficiency that a plumbing video camera brings on the table, you’ll be able to save money on repairs the fact that the problem will be solved at the first visit. You should also factor in the other costs involved such as in digging and returning your garden at its previous state.

Other Practical Uses

Video pipe inspection equipment are not only applicable in diagnosing plumbing problems, it is also useful on other circumstances. One of which is retrieving jewellery or other valuable stuff. If you happen to drop your ring on the sink and down to the drain, call us and we can help you locate it with the use of our high tech video gadget.

So, if you think you’ll want to have your drains or sewer pipes checked with our video equipment, sign up for the contact form below. Our team of emergency plumbers will be able to help you 24 hours a day, 7 days a week.

Residential Water Damage: How to Reduce the Risks

According to statistics, water damage accounts for millions of dollars in repair costs for Australian residents each year. While this problem may be caused by natural disasters such as storms or heavy rainfall, plumbing failure is often the culprit. Broken pipes, leaks, blocked drains and faulty fixtures will cause flooding and water seeping – in turn, causing water damage to your home.

Water damage is indeed a disaster for homeowners. However, it doesn’t mean that it can’t be prevented. There are several steps that one can take to reduce the risks or minimise damage:

1. Prioritise Preventive Plumbing Maintenance

Make sure that your plumbing system is regularly checked and maintained by professionals. A yearly inspection is recommended, enabling you to make the necessary repairs before plumbing disasters such as leaks and blockages occur. If it is possible, it is always a good idea to have a copy of your original plumbing plans so it makes the plumbers time to locate the problem much more efficient.

2. Install Safety Fixtures

There are several safety plumbing fixtures that can be installed in your home to avoid water damage. Two of the most common are the main shut-off valve and the pressure regulator. The main shut-off valve is basically the main switch of your water supply system. It is used in preventing water from entering your plumbing system during a leak or a suspected burst water pipe – which may prevent flooding. The function of the pressure regulator, on the other hand, is obviously to regulate the water pressure (PSI) on the pipes inside your home. This device can lengthen the lifespan of pipes and plumbing fixtures by lowering the PSI to just about the right amount of water flow.

3. Act Fast if It’s a Plumbing Emergency

When you experience plumbing emergencies, make sure to call an emergency plumber as soon as possible. Well, look no further for a reliable team that covers Melbourne’s Western Suburbs as Aqua Maintain is here. Our team of fully licensed technicians will be at your doorstep as fast as possible. Our emergency vehicles are fully equipped and with sufficient amount of spares and supplies so we can make the necessary repairs anytime of the day. If you are located in Point Cook, Altona, Werribee, Hoppers Crossing, Tarneit, or Wyndham Vale, contact us on (03) 9369 3707 right away!

4. Clean Up Fast During Leaks

When a leak occurs due to broken fixtures or burst pipes, remove as much water as possible. Make sure that valuable items such as home decors, wall paintings, books and wooden furniture are removed from the flooded area. After mopping, you can use fans to circulate the air and help dry the floor or any wet surfaces.

Safety Warning: If there is a great amount of water caused by the leak, avoid entering the flooded area if you think there is a risk of electrocution – especially for rooms wherein walls or the floor have electrical lines. Make sure to turn off the electricity supply first before doing the clean up.

5. Be able to Identify Unseen Problems

Not all damages on your plumbing system can easily be seen. Sometimes, leaks and pipe bursts may not be obvious to detect because they are hidden inside walls and roofs. You’ll only be able to see physical signs when water damage already shows. By comparing your usage figures of your monthly water bill, you may be able to detect a leak issue inside your home. Another way of detecting unseen leaks is through your installed water pressure gauge. By detecting a drop of PSI on your water supply, this may also indicate an unforeseen leak.

6. Check Your Appliances

Most of the time, water damage are caused by faulty water lines on washing machines and dishwashers. Thus, make sure that all appliances that use water are in proper order. Regularly check the rubber hoses that connect these equipment to your water lines. If you find signs of damages or wear and tear, replace or repair them at once to avoid leaks.

Water damage is truly a headache for homeowners. In addition to the inconvenience that it brings, it may be a costly problem to solve. Thus, it pays to make the necessary prevention steps. For a small expense today, you might be able to to save a lot of money in the long run.

MAKE CONTACT WITH US

Big or small, we’ve got a solution when you need it. Our advanced service and admin staff provide step-by-step instructions without being put on hold or waiting in line.