Advantages of Using High Tech Video Camera for Plumbing

Are you aware that video camera equipment are now becoming one of the most important tools that a plumber should have? Well, this high tech gadgetry brings efficiency to most emergency plumbing jobs such as clearing blocked drains or toilets. And we at Aqua Maintain are using this technology for quite some time now, enabling us to deliver quality service to our clients.

A plumbing video camera is a specialised waterproof device connected to a monitor or a screen. It delivers a video feed that enables professional plumbers to easily inspect sewer lines, drains and other types of piping. This process reduces the time needed to detect cracks, blockages, leaks and other plumbing problems.

Clearly, using video inspection equipment for plumbing jobs has many advantages.

Eliminates the Guesswork

Oldschool plumbers, most of the time, rely solely on their experience when it comes to diagnosing a plumbing problem. This means that they’ll be gathering information from the owner on the signs or indications of the problem and they’ll do guesswork to pinpoint the problem and the corresponding solution. We are not saying that experience should be disregarded nowadays with the presence of efficient technology. However, with the use of plumbing gadgetry combined with expertise, guesswork will be eliminated and problems will be resolved quickly.

Less Invasive Diagnostic and Repairs

With the use of video camera, the plumbing problem can be detected with pinpoint accuracy. There will be no hours of digging in your backyard or punching holes on your walls just find blockages or leaks. Furthermore, accurate diagnostic also means that we’ll exactly know what to repair or replace to resolve the problem. We will know how deep to dig to reduce the damage to your garden and we will also be able to locate the leaks on your pipes without damaging your walls.

Reduced Time and Cost

You may say that using efficient technology translates to increased cost for the plumbing services that you’ll receive. Well, this is not the case actually. With the efficiency that a plumbing video camera brings on the table, you’ll be able to save money on repairs the fact that the problem will be solved at the first visit. You should also factor in the other costs involved such as in digging and returning your garden at its previous state.

Other Practical Uses

Video pipe inspection equipment are not only applicable in diagnosing plumbing problems, it is also useful on other circumstances. One of which is retrieving jewellery or other valuable stuff. If you happen to drop your ring on the sink and down to the drain, call us and we can help you locate it with the use of our high tech video gadget.

So, if you think you’ll want to have your drains or sewer pipes checked with our video equipment, sign up for the contact form below. Our team of emergency plumbers will be able to help you 24 hours a day, 7 days a week.

Residential Water Damage: How to Reduce the Risks

According to statistics, water damage accounts for millions of dollars in repair costs for Australian residents each year. While this problem may be caused by natural disasters such as storms or heavy rainfall, plumbing failure is often the culprit. Broken pipes, leaks, blocked drains and faulty fixtures will cause flooding and water seeping – in turn, causing water damage to your home.

Water damage is indeed a disaster for homeowners. However, it doesn’t mean that it can’t be prevented. There are several steps that one can take to reduce the risks or minimise damage:

1. Prioritise Preventive Plumbing Maintenance

Make sure that your plumbing system is regularly checked and maintained by professionals. A yearly inspection is recommended, enabling you to make the necessary repairs before plumbing disasters such as leaks and blockages occur. If it is possible, it is always a good idea to have a copy of your original plumbing plans so it makes the plumbers time to locate the problem much more efficient.

2. Install Safety Fixtures

There are several safety plumbing fixtures that can be installed in your home to avoid water damage. Two of the most common are the main shut-off valve and the pressure regulator. The main shut-off valve is basically the main switch of your water supply system. It is used in preventing water from entering your plumbing system during a leak or a suspected burst water pipe – which may prevent flooding. The function of the pressure regulator, on the other hand, is obviously to regulate the water pressure (PSI) on the pipes inside your home. This device can lengthen the lifespan of pipes and plumbing fixtures by lowering the PSI to just about the right amount of water flow.

3. Act Fast if It’s a Plumbing Emergency

When you experience plumbing emergencies, make sure to call an emergency plumber as soon as possible. Well, look no further for a reliable team that covers Melbourne’s Western Suburbs as Aqua Maintain is here. Our team of fully licensed technicians will be at your doorstep as fast as possible. Our emergency vehicles are fully equipped and with sufficient amount of spares and supplies so we can make the necessary repairs anytime of the day. If you are located in Point Cook, Altona, Werribee, Hoppers Crossing, Tarneit, or Wyndham Vale, contact us on (03) 9369 3707 right away!

4. Clean Up Fast During Leaks

When a leak occurs due to broken fixtures or burst pipes, remove as much water as possible. Make sure that valuable items such as home decors, wall paintings, books and wooden furniture are removed from the flooded area. After mopping, you can use fans to circulate the air and help dry the floor or any wet surfaces.

Safety Warning: If there is a great amount of water caused by the leak, avoid entering the flooded area if you think there is a risk of electrocution – especially for rooms wherein walls or the floor have electrical lines. Make sure to turn off the electricity supply first before doing the clean up.

5. Be able to Identify Unseen Problems

Not all damages on your plumbing system can easily be seen. Sometimes, leaks and pipe bursts may not be obvious to detect because they are hidden inside walls and roofs. You’ll only be able to see physical signs when water damage already shows. By comparing your usage figures of your monthly water bill, you may be able to detect a leak issue inside your home. Another way of detecting unseen leaks is through your installed water pressure gauge. By detecting a drop of PSI on your water supply, this may also indicate an unforeseen leak.

6. Check Your Appliances

Most of the time, water damage are caused by faulty water lines on washing machines and dishwashers. Thus, make sure that all appliances that use water are in proper order. Regularly check the rubber hoses that connect these equipment to your water lines. If you find signs of damages or wear and tear, replace or repair them at once to avoid leaks.

Water damage is truly a headache for homeowners. In addition to the inconvenience that it brings, it may be a costly problem to solve. Thus, it pays to make the necessary prevention steps. For a small expense today, you might be able to to save a lot of money in the long run.

6 Common Culprits of Low Water Pressure in Your Home

Low water pressure is a very irritating problem to deal with for most homeowners. It can be very frustrating and time-consuming. Furthermore, figuring out on your own what’s wrong with your plumbing system can be confusing.

So, what are the common causes of low water pressure in your home? We have listed 6 common reasons below;

Water Supply Malfunctions

There are times when low water pressure occurs when there is seemingly nothing wrong with your plumbing. This is more likely caused by a malfunction on the public water supply system in your area. If you suspect it’s the problem, you should get in touch with your local water supply department to make sure that they are aware of the issue.

Incorrect Pipe Sizes

If you have recently fixed your plumbing system and you are experiencing a drop of water pressure, this may be due to the incorrect pipe size and specifications. This is common to homeowners who are trying to cut their budgets by hiring amateur plumbers or even doing DIY. Indeed, you can save money upfront by choosing amateurs; but the workmanship won’t be the same compared to using a qualified Aqua Maintain plumber.

Mineral Build-Up

Every pipe within your plumbing system throughout the home is susceptible to mineral build-up. Remember that water contains minerals and these can be deposited on the surface of the pipes. Over many years, the slow build-up can block the flow of water. This problem can be solved using a specialised plumbing chemical that can break down the sediments and deposits to be flushed out of the pipes.


If you are using steel or galvanised iron pipes, then corrosion can also be the cause of low water pressure. Similar to mineral build-up, corrosion can cover a huge part of the pipes which can then block the flow of water. However, this is not a quick fix, it would require a complete removal and reinstatement of new pipes which may be a costly exercise.

Faulty Taps & Fixtures

Sometimes, a suspected low water pressure problem in your plumbing system isn’t really about low PSI. The signs of low water output or slow flow may be caused by a faulty tap or fixtures. It is best to check their functionality before concluding a low pressure problem – especially if the fixtures in your home are a bit old. If this is the problem, then some simple replacements will do the job.

Pipe Leaks

Sometimes water leaks won’t be evident, especially if the broken pipes are not visible. Checking this problem can be easy. Shut off all the valves and taps in and out of your home, then record the meter reading. After a few hours, record the meter again and check for a difference. If there is an increase on the readings, then a leaking pipe is your problem.

Friendly Reminder: Although we have provided you with some ideas of what may cause low water pressure in your home, avoid doing the repairs or troubleshooting on your own. Remember that incorrect installation of pipes may cause further problems down the track, or worst, can be an extremely costly exercise. When experiencing low water pressure or any other plumbing issues for that matter, it’s best to have plumbing experts like Aqua Maintain take a look. You can contact us here at Aqua Maintain. We are a team of plumbing maintenance and emergency specialists based in Point Cook. We cover Melbourne and the rest of the Western Suburbs including Werribee, Hoppers Crossing and Altona.

5 Signs You Need to Hire a Drain Repair Professional

At the start of our blog, we have provided you with some tips on drainage handling. However, sometimes it is inevitable that your kitchen, bathroom and wastewater drains at home encounter problems. A simple debris build-up on your sewage pipes, if unfixed, may result into complicated clogs that can ruin your plumbing system.

Well, we all know that any repairs related to drains or sewers can entirely be unpleasant – it will surely be messy and smelly. But worry not as we professional plumbers are here to help you. We are committed towards fixing all your plumbing issues. Thus, if you noticed these signs of drain problems, call us right away:

Smelly Drains

If there is a foul odour that comes out of your drains, there is a big possibility that your wastewater system is damaged. There can be leaks along the pipes which cause air to enter through these leaks and exit through the drain opening, creating that sewer smell. While you might think that it can be solve by masking the smell using a deodorant, it would be best to have it checked by professional plumbers so that the right steps are taken.

Slow Drainage

Do you think that the water that goes to your drains became slow-moving? Well, this is a sign of a clog. It can be a minor clog near the drain opening or it can be a serious one that can be found on your main sewage system. You may think that using a plunger will do the job, but remember that this may not be the case. Fixing this yourself may even worsen the situation. To avoid wasting your time and effort, let a drain expert help you.

Wastewater Backflow

Backflow is somehow similar to having a smelly drain (or both scenarios may also happen). However, instead of air coming out, it is water that flows back outside of the pipes out to the drains. There are lots of underlying factors that affects this, but a damaged pipe is the usual culprit. Make sure to hire a professional plumber right away to avoid further damage on your drainage system.

Gurgling Sound Inside Drain Pipes

For the common homeowner, a gurgling sound of water flowing inside the drainage is normal. But this is not the case as always. This sound may also mean that your drain pipes have accumulated a considerable amount of debris. These may include food bits, soap sudd, oil and others. The build-up creates packets of air and when water goes through them, a gurgling sound occurs. Have this checked by a professional to ensure that there’s nothing wrong with your drainage system.

Water Flooding

If leaking wastewater pipes are unchecked, especially those found in your basement or outside of your home, this may cause the build-up of water around the area. Flooding will wreck havoc in your home, especially if it is wastewater. It can cause immediate inconvenience due to its unpleasant smell while it can result to costly damage on walls and other parts of your home. If flooding occurs, call your plumber as soon as possible!

If any of these signs are present in your drainage system, make sure to call us here at Aqua Maintain. We will dispatch our team of drain repair specialist to fix your problem. We prioritise quality service, thus you are rest assured that our workmanship is of top class. You can get in touch with us anytime of the day, any day of the week. We service the whole Melbourne including the Western Suburbs of Point Cook, Werribee, Hoppers Crossing and Altona.

Practical Tips to Follow to Prevent Plumbing Disasters at Home

Blocked drains, burst pipes, faulty toilets and other similar problems on your water and gas systems can be considered plumbing disasters at home. In our many years of serving clients in Point Cook, Werribee, Hoppers Crossing, Altona and the surrounding Melbourne suburbs, we have seen how these plumbing mishaps bring inconvenience to families and property owners. To avoid or make these problems easier to handle, here are some tips from our plumbing technitians:

1. Properly Plan All Your Plumbing Projects

Whenever you have to implement changes or improvements on your plumbing system at home, make sure that the project is well-thought out. Proper planning will help you save time and money as all the work will be smooth and continuous and you’ll only be buying the right amount of materials.

2. Install a Backflow Preventer

A backflow preventer is an important device to be installed on your water supply system. It is used to avoid any contamination or pollution to potable water whenever a huge leak is present either from inside your home or from the main water source system outside. If you think you don’t have this system installed in your water line, give us a call so we can help.

3. Follow Plumbing Codes

Like any other home project, see to it that your local building and plumbing regulations and codes are followed for every plumbing project that you undertake. May it be a rainwater tank installation or a new water supply system, make sure that all the work done is of high standard. This lets you ensure the safety of using the plumbing system installed and its longevity. To make this easier for you, hire a registered and licensed professional plumber.

4. Know the Layout of Your Plumbing System

It is important that you know where the pipes and connections of all the plumbing systems in your home are located. If possible, you should keep a copy of the plumbing layout. This will help you avoid any damage to your water supply or drainage system in times of home renovations or repairs. This will also make plumbing maintenances easy as you will be able to determine what and where to check.

5. Use the Right Materials

In whatever repairs or plumbing installation at home, make sure that you are using the right materials. While the piping materials guide we previously provided will indeed help you, it is best to follow the suggestions of professional plumbers. In fact, it would be best if you’ll allow them to supply the materials for you. It will further help you save time and money.

6. Conduct Yearly Check-Up & Maintenance

Hire a professional plumber to take a look at the condition of your plumbing systems at least once a year. This is to make sure that all of your water and gas lines are in proper functioning condition. This will also help identify existing problems that should be repaired to avoid plumbing disasters.

7. Hire Only Professionals

Same as using the correct materials, make sure that every plumbing job in your home is handled only by licensed and experienced plumbers. Well, look no further for a team that you can truly trust. Aqua Maintain can provide you with the right plumbing solutions at reasonable rates. We cover Point Cook, Altona, Werribee, Hoppers Crossing and the rest of Melbourne’s western suburbs.

We also offer 24/7 emergency plumbing service in the areas that we mentioned above. You can call us 24/7 and we will do our best to respond urgently.


Big or small, we’ve got a solution when you need it. Our advanced service and admin staff provide step-by-step instructions without being put on hold or waiting in line.